Defined ssize_t in unistd.h.

Added the _syscall2 macro to unistd.h to facilitate system calls that
require two arguments to be passed.

Modified the ATA driver to simply abort initialisation if a drive is not
found, or cannot be configured. This will allow the kernel to function
on a diskless system without invoking panic() unnecessarily.

Added the functions irq_enable() and irq_disable() to asm/interrupt.h to
make it easier for C code to mask and unmask IRQ's on each PIC.

Moved the declaration for rsputs() from kernel/con.h to the new
kernel/serial.h file since this is a function provided by the serial
driver.

Implemented a basic I/O input framework. This involves the new system
call sys_read, which takes an I/O read request and directs it to the
appropriate kernel handler function depending on the calling process'
ctty value. This mechanism is identical to the sys_puts system call.

Added the rsread() function to service sys_read calls from processes
whose ctty value is equal to 1. This function will continually copy data
from the serial buffer to the location specified. If there is not a
sufficient amount of new data in the buffer to satisfy the request, the
process is put into the TSTATE_UNINTERRUPTIBLE state and the scheduler
is called to switch tasks. Prior to calling the scheduler, the function
will set the waiting_task pointer to the calling process. This pointer
will later be used by the interrupt handler to wake the process when new
data arrives.

Added an interrupt handler to service the IRQ4 (UART) interrupt. This
subroutine is a stub which will save the machine's state then transfer
control to rs_handler() in serial.c which will read bytes from the
serial port and place them in a buffer. Before returning, rs_handler()
checks the waiting_task pointer to see if a task is waiting for the
newly received data and if so, it sets the task's state to
TSTATE_RUNNING before resetting the pointer to NULL and returning.
Ideally, the scheduler should be invoked at this point to select another
task but since our basic round-robin scheduler currently has no concept
of task priorities (and for the sake of simplicity), we will avoid
invoking the scheduler in response to interrupts for now.

6 files changed, 62 insertions, 5 deletions

diff --git a/include/asm/interrupt.h b/include/asm/interrupt.h
index d1ea6c1..1187fef 100644
--- a/include/asm/interrupt.h
+++ b/include/asm/interrupt.h
@@ -1,2 +1,29 @@
+#include <stdint.h>
+
+#define irq_enable(n) \
+  __asm__ volatile ( \
+      "inb $0xA1, %%al\n" \
+      "shl $8, %%ax\n" \
+      "inb $0x21, %%al\n" \
+      "xor $0xFFFF, %%bx\n" \
+      "and %%bx, %%ax\n" \
+      "outb %%al, $0x21\n" \
+      "shr $8, %%ax\n" \
+      "outb %%al, $0xA1\n" \
+      :: "b" (n) \
+      );
+
+#define irq_disable(n) \
+  __asm__ volatile ( \
+      "inb $0xA1, %%al\n" \
+      "shl $8, %%ax\n" \
+      "inb $0x21, %%al\n" \
+      "or %%bx, %%ax\n" \
+      "outb %%al, $0x21\n" \
+      "shr $8, %%ax\n" \
+      "outb %%al, $0xA1\n" \
+      :: "b" (n) \
+      );
+
 void register_isr(uint8_t n, uint8_t dpl, void *handler);
 void register_trap(uint8_t n, uint8_t dpl, void *handler);
diff --git a/include/kernel/con.h b/include/kernel/con.h
index d28daff..9dd9dbe 100644
--- a/include/kernel/con.h
+++ b/include/kernel/con.h
@@ -13,6 +13,4 @@ void con_clear(void);
 
 int printk(char*, ...);
 
-int rsputs(char*);
-
 #endif
diff --git a/include/kernel/serial.h b/include/kernel/serial.h
new file mode 100644
index 0000000..dbfa7f2
--- /dev/null
+++ b/include/kernel/serial.h
@@ -0,0 +1,10 @@
+#ifndef _SERIAL_H
+#define _SERIAL_H
+
+#include <sys/types.h>
+
+int rsputs(char*);
+
+ssize_t rsread(void*, size_t);
+
+#endif
diff --git a/include/kernel/sys.h b/include/kernel/sys.h
index 32788b1..c428c72 100644
--- a/include/kernel/sys.h
+++ b/include/kernel/sys.h
@@ -8,6 +8,7 @@ extern int sys_signal(void);
 extern int sys_alarm(void);
 extern int sys_pause(void);
 extern int sys_ctty(void);
+extern int sys_read(void);
 extern int sys_dummy(void);
 
 syscall_t call_table[256] = {
@@ -19,7 +20,7 @@ syscall_t call_table[256] = {
   [5] = &sys_alarm,
   [6] = &sys_pause,
   [7] = &sys_ctty,
-  [8] = &sys_dummy,
+  [8] = &sys_read,
   [9] = &sys_dummy,
   [10] = &sys_dummy,
   [11] = &sys_dummy,
diff --git a/include/stdio.h b/include/stdio.h
index 824eb31..f94e783 100644
--- a/include/stdio.h
+++ b/include/stdio.h
@@ -2,6 +2,8 @@
 #define _STDIO_H
 
 #include <stdarg.h>
+#include <sys/types.h>
+#include <unistd.h>
 
 #define EOF -1
 
@@ -12,6 +14,8 @@ int sprintf(char*, char*, ...);
 
 int vsprintf(char*, char*, va_list);
 
+ssize_t read(void *buf, size_t len);
+
 int ctty(int ctty);
 
 #endif
diff --git a/include/unistd.h b/include/unistd.h
index 746c829..ef6d059 100644
--- a/include/unistd.h
+++ b/include/unistd.h
@@ -3,6 +3,11 @@
 
 #include <stdint.h>
 
+#ifndef _SSIZE_T
+#define _SSIZE_T
+typedef int32_t ssize_t;
+#endif
+
 typedef uint16_t pid_t;
 
 #define __SYS_puts      0
@@ -13,6 +18,7 @@ typedef uint16_t pid_t;
 #define __SYS_alarm     5
 #define __SYS_pause     6
 #define __SYS_ctty      7
+#define __SYS_read      8
 
 #define _syscall0(type, name) \
   type name(void) { \
@@ -21,7 +27,7 @@ typedef uint16_t pid_t;
         "int $0x80" \
         : "=a" (__res) \
         : "a" (__SYS_##name) \
-        :); \
+        ); \
     return __res; \
   }
 
@@ -32,7 +38,18 @@ typedef uint16_t pid_t;
         "int $0x80" \
         : "=a" (__res) \
         : "a" (__SYS_##name), "b" (a) \
-        :); \
+        ); \
+    return __res; \
+  }
+
+#define _syscall2(type, name, atype, a, btype, b) \
+  type name(atype a, btype b) { \
+    type __res; \
+    __asm__ volatile ( \
+        "int $0x80" \
+        : "=a" (__res) \
+        : "a" (__SYS_##name), "b" (a), "c" (b) \
+        ); \
     return __res; \
   }