| Age | Commit message (Collapse) | Author |
|---|
|
Added the _syscall2 macro to unistd.h to facilitate system calls that
require two arguments to be passed.
Modified the ATA driver to simply abort initialisation if a drive is not
found, or cannot be configured. This will allow the kernel to function
on a diskless system without invoking panic() unnecessarily.
Added the functions irq_enable() and irq_disable() to asm/interrupt.h to
make it easier for C code to mask and unmask IRQ's on each PIC.
Moved the declaration for rsputs() from kernel/con.h to the new
kernel/serial.h file since this is a function provided by the serial
driver.
Implemented a basic I/O input framework. This involves the new system
call sys_read, which takes an I/O read request and directs it to the
appropriate kernel handler function depending on the calling process'
ctty value. This mechanism is identical to the sys_puts system call.
Added the rsread() function to service sys_read calls from processes
whose ctty value is equal to 1. This function will continually copy data
from the serial buffer to the location specified. If there is not a
sufficient amount of new data in the buffer to satisfy the request, the
process is put into the TSTATE_UNINTERRUPTIBLE state and the scheduler
is called to switch tasks. Prior to calling the scheduler, the function
will set the waiting_task pointer to the calling process. This pointer
will later be used by the interrupt handler to wake the process when new
data arrives.
Added an interrupt handler to service the IRQ4 (UART) interrupt. This
subroutine is a stub which will save the machine's state then transfer
control to rs_handler() in serial.c which will read bytes from the
serial port and place them in a buffer. Before returning, rs_handler()
checks the waiting_task pointer to see if a task is waiting for the
newly received data and if so, it sets the task's state to
TSTATE_RUNNING before resetting the pointer to NULL and returning.
Ideally, the scheduler should be invoked at this point to select another
task but since our basic round-robin scheduler currently has no concept
of task priorities (and for the sake of simplicity), we will avoid
invoking the scheduler in response to interrupts for now.
|
|
CPU is not an i386 before executing the invlpg instruction with the
provided address. This will once again make the kernel compatible with
the i386 processor as executing the invlpg instruction without these
checks would have resulted in an invalid opcode exception.
|
|
the IDT. This function takes the same parameters as register_isr() which
creates interrupt gate entries in the IDT.
The register_isr() function now sets the gate type to 0x0E regardless of
what was already in the descriptor. This is to break reliance on the IDT
already being initialized to a known state as well as avoiding conflicts
with the new register_trap() function.
Added declaration for the 'ticks' variable in kernel/sched.h so that
it's value may be used throughout the kernel.
Changed the system call gate to a trap gate. This means that interrupts
will not be disabled prior to entry into the system call handler. This
will allow hardware functions such as the timer to operate continuously
even if the user makes a system call.
Added checks to the timer interrupt handler. These checks prevent the
scheduler from being called if the interrupt occurred during kernel mode
execution. The idea here, is that the timer interrupt handler only
services the hardware (increments the tick count and sends an EOI to the
PIC's) if a system call was already running in the kernel. The system
call handler has also been expanded to check if the timer fired prior to
returning to userspace. If the timer did fire, the syscall handler will
invoke the scheduler (as the timer handler would have), so that it can
decide if it's time to switch tasks.
|
|
rather than in kmain() as some subsystems may now require early console
I/O.
Added 16-bit read/write I/O functions to asm/io.h. These functions are
inw() and outw() respectively.
Added the file kernel/fs.h which will contain definitions relating to
filesystem functions.
Defined the type off_t as a signed 32-bit value in sys/types.h. This
type will be required for filesystem functionality.
Added the directory 'kernel/fs' to the project's source tree. The
kernel's makefile has been updated accordingly. This directory will
contain any source files relating to filesystem functionality (both
assembly and C files).
Added the file 'fs/hd.c' to the kernel's source tree. This file
currently contains three main functions (which are defined in
kernel/hd.h). These functions are as follows; hd_init() to enumerate and
initialize the hard disks, hd_read() to read sectors from the disk and
hd_write() to write sectors to the disk. Currently, all transfers are
done in ATA PIO mode using polling, however this will change in future.
The function hd_init() is called during the kernel's boot sequence in
kboot().
Added the file hd.img to the project's root directory. This is a 20MB
raw image file that will be used by Qemu as a 20MB hard disk. The main
makefile has been updated to tell Qemu to use this file on launch.
|
|
each structure has a TSS inside, as well as several descriptor entries
in the GDT pointing to each task's TSS. Task switching is performed in
hardware by means of far jumping to the new task's TSS descriptor in the
GDT. Task states are saved manually by copying the saved state from the
interrupt handler's stack, back into the task's TSS.
Added the function save_state() to sched.c which can be called from
assembly to copy the state information of the suspended task from the
current stack, to it's respective task structure. NOTE: this assumes
that the pointer cstate has been set ahead of time to point to the state
information on the stack, and that the pointer ctask has not yet been
modified.
Added the function reschedule() which is currently called from the
timer's tick handler. Currently, this function merely alternates between
the two tasks created in sched_init(), but in future, will be expanded
to decided independently which task will run next.
The function userspace_init() was renamed to the more appropriate
sched_init().
Moved most of the code from the original userspace_init() to the new
function create_proc() which sets up a virtual address space and state
information, copies the specified binary into the new address space,
then returns a pointer to the newly created tasks entry in the task
table.
Defined the type pid_t in unistd.h as a 16-bit unsigned integer.
Added two new debugging system calls for checking which task is
currently active. The getpid() system calls returns the caller's PID
whilst the getpdir() call returns the physical location of the caller's
page directory (the value of CR3). The getpdir() call can be used as a
fallback to determine which task is *actually* running if the
information in ctask or the getpid() call is faulty.
Added two new subroutines; set_tss() and clear_tss() (whose prototypes
are defined in asm/system.h) for managing the task-state descriptor
entries in the GDT. set_tss() initializes a TSS descriptor and sets it's
base pointer to the supplied TSS pointer whilst clear_tss() simply marks
a TSS descriptor as 'not present' without clearing it.
|
|
is produced. This may change later.
Added the new directory 'lib' to the source tree which build lib.a, an
archive containing common library routines for both the kernel and
userspace code to use.
Added the file string.c to the lib directory (as well as the appropriate
headers in /include) which provides some basic functions from the
standard C string library.
Added a physical memory manager which is now located in memory.c. This
memory manager tracks free pages from 1MB-8MB with a simple table and
allocates memory in blocks of 4KB pages. Multiple pages can be allocated
in which they are returned as a linked list.
Added a 'page window' in memory.c which allows the temporary mapping of
a single page at a time into the current address space.
Moved all paging routines that were previously located in page.s over to
memory.c where they have been re-implemented as a mixture of C and
inline assembly.
Moved the primative userspace routines from usrspace.s over to the new
sched.c. The only remaining routine, usrcall is now located in asm.s as
'switch_to' which takes two arguments, pointers to the task structure
and task state structure of the new task which is being switched to.
Pages for userspace are now allocated dynamically. The user binary is
loaded in at 1GB upwards. The user stack is located at the end of the
4GB address space with the lower 1GB being reserved for the kernel.
Updated the link.ld file for the userspace binary to include the new
starting address 0x40000000 (1GB).
Renamed the symbols for the user binary blob to make them shorter.
|
|
assembly function register_isr making it usable within the C portions of
the source.
Added a new file panic.s with the function panic that will print a panic
message, disable interrupts and halt the system.
Created the skeleton framework for paging in the new file page.s. The
new function paging_init (called in kboot) will setup a simple page
directory with two tables covering all addresses 0-8MB. It will also
mark pages from 0-1MB as 'supervisor-only' to protect the kernel. NOTE:
The function paging_init must be called before initialising the IDT as
it does not disable interrupts!
Modified the page fault handler to print the offending linear address
along with the supplied error code. Following that, the handler will
initiate a kernel panic. This function (along with panic) assumes
console I/O to be operational.
Modified the userspace test code to deliberately intiate a page fault by
accessing an unmapped page.
|
|
|
