v0.1v0.1

18 files changed, 2027 insertions, 0 deletions

diff --git a/.editorconfig b/.editorconfig
new file mode 100644
index 0000000..6d8f727
--- /dev/null
+++ b/.editorconfig
@@ -0,0 +1,4 @@
+[*.cs]
+
+# CS8618: Non-nullable field must contain a non-null value when exiting constructor. Consider declaring as nullable.
+dotnet_diagnostic.CS8618.severity = silent
diff --git a/.gitattributes b/.gitattributes
new file mode 100644
index 0000000..1ff0c42
--- /dev/null
+++ b/.gitattributes
@@ -0,0 +1,63 @@
+###############################################################################
+# Set default behavior to automatically normalize line endings.
+###############################################################################
+* text=auto
+
+###############################################################################
+# Set default behavior for command prompt diff.
+#
+# This is need for earlier builds of msysgit that does not have it on by
+# default for csharp files.
+# Note: This is only used by command line
+###############################################################################
+#*.cs     diff=csharp
+
+###############################################################################
+# Set the merge driver for project and solution files
+#
+# Merging from the command prompt will add diff markers to the files if there
+# are conflicts (Merging from VS is not affected by the settings below, in VS
+# the diff markers are never inserted). Diff markers may cause the following 
+# file extensions to fail to load in VS. An alternative would be to treat
+# these files as binary and thus will always conflict and require user
+# intervention with every merge. To do so, just uncomment the entries below
+###############################################################################
+#*.sln       merge=binary
+#*.csproj    merge=binary
+#*.vbproj    merge=binary
+#*.vcxproj   merge=binary
+#*.vcproj    merge=binary
+#*.dbproj    merge=binary
+#*.fsproj    merge=binary
+#*.lsproj    merge=binary
+#*.wixproj   merge=binary
+#*.modelproj merge=binary
+#*.sqlproj   merge=binary
+#*.wwaproj   merge=binary
+
+###############################################################################
+# behavior for image files
+#
+# image files are treated as binary by default.
+###############################################################################
+#*.jpg   binary
+#*.png   binary
+#*.gif   binary
+
+###############################################################################
+# diff behavior for common document formats
+# 
+# Convert binary document formats to text before diffing them. This feature
+# is only available from the command line. Turn it on by uncommenting the 
+# entries below.
+###############################################################################
+#*.doc   diff=astextplain
+#*.DOC   diff=astextplain
+#*.docx  diff=astextplain
+#*.DOCX  diff=astextplain
+#*.dot   diff=astextplain
+#*.DOT   diff=astextplain
+#*.pdf   diff=astextplain
+#*.PDF   diff=astextplain
+#*.rtf   diff=astextplain
+#*.RTF   diff=astextplain
diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..f4f0633
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,366 @@
+## Ignore Visual Studio temporary files, build results, and
+## files generated by popular Visual Studio add-ons.
+##
+## Get latest from https://github.com/github/gitignore/blob/master/VisualStudio.gitignore
+
+# User-specific files
+*.rsuser
+*.suo
+*.user
+*.userosscache
+*.sln.docstates
+
+# User-specific files (MonoDevelop/Xamarin Studio)
+*.userprefs
+
+# Mono auto generated files
+mono_crash.*
+
+# Build results
+[Dd]ebug/
+[Dd]ebugPublic/
+[Rr]elease/
+[Rr]eleases/
+x64/
+x86/
+[Ww][Ii][Nn]32/
+[Aa][Rr][Mm]/
+[Aa][Rr][Mm]64/
+bld/
+[Bb]in/
+[Oo]bj/
+[Oo]ut/
+[Ll]og/
+[Ll]ogs/
+
+# Visual Studio 2015/2017 cache/options directory
+.vs/
+# Uncomment if you have tasks that create the project's static files in wwwroot
+#wwwroot/
+
+# Visual Studio 2017 auto generated files
+Generated\ Files/
+
+# MSTest test Results
+[Tt]est[Rr]esult*/
+[Bb]uild[Ll]og.*
+
+# NUnit
+*.VisualState.xml
+TestResult.xml
+nunit-*.xml
+
+# Build Results of an ATL Project
+[Dd]ebugPS/
+[Rr]eleasePS/
+dlldata.c
+
+# Benchmark Results
+BenchmarkDotNet.Artifacts/
+
+# .NET Core
+project.lock.json
+project.fragment.lock.json
+artifacts/
+
+# ASP.NET Scaffolding
+ScaffoldingReadMe.txt
+
+# StyleCop
+StyleCopReport.xml
+
+# Files built by Visual Studio
+*_i.c
+*_p.c
+*_h.h
+*.ilk
+*.meta
+*.obj
+*.iobj
+*.pch
+*.pdb
+*.ipdb
+*.pgc
+*.pgd
+*.rsp
+*.sbr
+*.tlb
+*.tli
+*.tlh
+*.tmp
+*.tmp_proj
+*_wpftmp.csproj
+*.log
+*.vspscc
+*.vssscc
+.builds
+*.pidb
+*.svclog
+*.scc
+
+# Chutzpah Test files
+_Chutzpah*
+
+# Visual C++ cache files
+ipch/
+*.aps
+*.ncb
+*.opendb
+*.opensdf
+*.sdf
+*.cachefile
+*.VC.db
+*.VC.VC.opendb
+
+# Visual Studio profiler
+*.psess
+*.vsp
+*.vspx
+*.sap
+
+# Visual Studio Trace Files
+*.e2e
+
+# TFS 2012 Local Workspace
+$tf/
+
+# Guidance Automation Toolkit
+*.gpState
+
+# ReSharper is a .NET coding add-in
+_ReSharper*/
+*.[Rr]e[Ss]harper
+*.DotSettings.user
+
+# TeamCity is a build add-in
+_TeamCity*
+
+# DotCover is a Code Coverage Tool
+*.dotCover
+
+# AxoCover is a Code Coverage Tool
+.axoCover/*
+!.axoCover/settings.json
+
+# Coverlet is a free, cross platform Code Coverage Tool
+coverage*.json
+coverage*.xml
+coverage*.info
+
+# Visual Studio code coverage results
+*.coverage
+*.coveragexml
+
+# NCrunch
+_NCrunch_*
+.*crunch*.local.xml
+nCrunchTemp_*
+
+# MightyMoose
+*.mm.*
+AutoTest.Net/
+
+# Web workbench (sass)
+.sass-cache/
+
+# Installshield output folder
+[Ee]xpress/
+
+# DocProject is a documentation generator add-in
+DocProject/buildhelp/
+DocProject/Help/*.HxT
+DocProject/Help/*.HxC
+DocProject/Help/*.hhc
+DocProject/Help/*.hhk
+DocProject/Help/*.hhp
+DocProject/Help/Html2
+DocProject/Help/html
+
+# Click-Once directory
+publish/
+
+# Publish Web Output
+*.[Pp]ublish.xml
+*.azurePubxml
+# Note: Comment the next line if you want to checkin your web deploy settings,
+# but database connection strings (with potential passwords) will be unencrypted
+*.pubxml
+*.publishproj
+
+# Microsoft Azure Web App publish settings. Comment the next line if you want to
+# checkin your Azure Web App publish settings, but sensitive information contained
+# in these scripts will be unencrypted
+PublishScripts/
+
+# NuGet Packages
+*.nupkg
+# NuGet Symbol Packages
+*.snupkg
+# The packages folder can be ignored because of Package Restore
+**/[Pp]ackages/*
+# except build/, which is used as an MSBuild target.
+!**/[Pp]ackages/build/
+# Uncomment if necessary however generally it will be regenerated when needed
+#!**/[Pp]ackages/repositories.config
+# NuGet v3's project.json files produces more ignorable files
+*.nuget.props
+*.nuget.targets
+
+# Microsoft Azure Build Output
+csx/
+*.build.csdef
+
+# Microsoft Azure Emulator
+ecf/
+rcf/
+
+# Windows Store app package directories and files
+AppPackages/
+BundleArtifacts/
+Package.StoreAssociation.xml
+_pkginfo.txt
+*.appx
+*.appxbundle
+*.appxupload
+
+# Visual Studio cache files
+# files ending in .cache can be ignored
+*.[Cc]ache
+# but keep track of directories ending in .cache
+!?*.[Cc]ache/
+
+# Others
+ClientBin/
+~$*
+*~
+*.dbmdl
+*.dbproj.schemaview
+*.jfm
+*.pfx
+*.publishsettings
+orleans.codegen.cs
+
+# Including strong name files can present a security risk
+# (https://github.com/github/gitignore/pull/2483#issue-259490424)
+#*.snk
+
+# Since there are multiple workflows, uncomment next line to ignore bower_components
+# (https://github.com/github/gitignore/pull/1529#issuecomment-104372622)
+#bower_components/
+
+# RIA/Silverlight projects
+Generated_Code/
+
+# Backup & report files from converting an old project file
+# to a newer Visual Studio version. Backup files are not needed,
+# because we have git ;-)
+_UpgradeReport_Files/
+Backup*/
+UpgradeLog*.XML
+UpgradeLog*.htm
+ServiceFabricBackup/
+*.rptproj.bak
+
+# SQL Server files
+*.mdf
+*.ldf
+*.ndf
+
+# Business Intelligence projects
+*.rdl.data
+*.bim.layout
+*.bim_*.settings
+*.rptproj.rsuser
+*- [Bb]ackup.rdl
+*- [Bb]ackup ([0-9]).rdl
+*- [Bb]ackup ([0-9][0-9]).rdl
+
+# Microsoft Fakes
+FakesAssemblies/
+
+# GhostDoc plugin setting file
+*.GhostDoc.xml
+
+# Node.js Tools for Visual Studio
+.ntvs_analysis.dat
+node_modules/
+
+# Visual Studio 6 build log
+*.plg
+
+# Visual Studio 6 workspace options file
+*.opt
+
+# Visual Studio 6 auto-generated workspace file (contains which files were open etc.)
+*.vbw
+
+# Visual Studio LightSwitch build output
+**/*.HTMLClient/GeneratedArtifacts
+**/*.DesktopClient/GeneratedArtifacts
+**/*.DesktopClient/ModelManifest.xml
+**/*.Server/GeneratedArtifacts
+**/*.Server/ModelManifest.xml
+_Pvt_Extensions
+
+# Paket dependency manager
+.paket/paket.exe
+paket-files/
+
+# FAKE - F# Make
+.fake/
+
+# CodeRush personal settings
+.cr/personal
+
+# Python Tools for Visual Studio (PTVS)
+__pycache__/
+*.pyc
+
+# Cake - Uncomment if you are using it
+# tools/**
+# !tools/packages.config
+
+# Tabs Studio
+*.tss
+
+# Telerik's JustMock configuration file
+*.jmconfig
+
+# BizTalk build output
+*.btp.cs
+*.btm.cs
+*.odx.cs
+*.xsd.cs
+
+# OpenCover UI analysis results
+OpenCover/
+
+# Azure Stream Analytics local run output
+ASALocalRun/
+
+# MSBuild Binary and Structured Log
+*.binlog
+
+# NVidia Nsight GPU debugger configuration file
+*.nvuser
+
+# MFractors (Xamarin productivity tool) working folder
+.mfractor/
+
+# Local History for Visual Studio
+.localhistory/
+
+# BeatPulse healthcheck temp database
+healthchecksdb
+
+# Backup folder for Package Reference Convert tool in Visual Studio 2017
+MigrationBackup/
+
+# Ionide (cross platform F# VS Code tools) working folder
+.ionide/
+
+# Fody - auto-generated XML schema
+FodyWeavers.xsd
+/.config
+
+*.sln
diff --git a/CHANGELOG.md b/CHANGELOG.md
new file mode 100644
index 0000000..0e3181e
--- /dev/null
+++ b/CHANGELOG.md
@@ -0,0 +1,3 @@
+# Version 0.1
+
+Initial release
diff --git a/LICENSE.txt b/LICENSE.txt
new file mode 100644
index 0000000..f288702
--- /dev/null
+++ b/LICENSE.txt
@@ -0,0 +1,674 @@
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.  We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors.  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights.  Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received.  You must make sure that they, too, receive
+or can get the source code.  And you must show them these terms so they
+know their rights.
+
+  Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+  For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software.  For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+  Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so.  This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software.  The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable.  Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products.  If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+  Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary.  To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Use with the GNU Affero General Public License.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+  If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+    <program>  Copyright (C) <year>  <name of author>
+    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
+
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<https://www.gnu.org/licenses/>.
+
+  The GNU General Public License does not permit incorporating your program
+into proprietary programs.  If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.  But first, please read
+<https://www.gnu.org/licenses/why-not-lgpl.html>.
diff --git a/Migrations/20230705160931_Initial.Designer.cs b/Migrations/20230705160931_Initial.Designer.cs
new file mode 100644
index 0000000..598258f
--- /dev/null
+++ b/Migrations/20230705160931_Initial.Designer.cs
@@ -0,0 +1,159 @@
+// <auto-generated />
+using System;
+using Microsoft.EntityFrameworkCore;
+using Microsoft.EntityFrameworkCore.Infrastructure;
+using Microsoft.EntityFrameworkCore.Migrations;
+using Microsoft.EntityFrameworkCore.Storage.ValueConversion;
+using Npgsql.EntityFrameworkCore.PostgreSQL.Metadata;
+using PagerParser;
+
+#nullable disable
+
+namespace PagerParser.Migrations
+{
+    [DbContext(typeof(PagerContext))]
+    [Migration("20230705160931_Initial")]
+    partial class Initial
+    {
+        /// <inheritdoc />
+        protected override void BuildTargetModel(ModelBuilder modelBuilder)
+        {
+#pragma warning disable 612, 618
+            modelBuilder
+                .HasAnnotation("ProductVersion", "7.0.8")
+                .HasAnnotation("Relational:MaxIdentifierLength", 63);
+
+            NpgsqlModelBuilderExtensions.UseIdentityByDefaultColumns(modelBuilder);
+
+            modelBuilder.Entity("PagerParser.GpsPosition", b =>
+                {
+                    b.Property<int>("GpsPositionId")
+                        .ValueGeneratedOnAdd()
+                        .HasColumnType("integer");
+
+                    NpgsqlPropertyBuilderExtensions.UseIdentityByDefaultColumn(b.Property<int>("GpsPositionId"));
+
+                    b.Property<double>("Latitude")
+                        .HasColumnType("double precision");
+
+                    b.Property<double>("Longitude")
+                        .HasColumnType("double precision");
+
+                    b.HasKey("GpsPositionId");
+
+                    b.ToTable("GpsPositions");
+                });
+
+            modelBuilder.Entity("PagerParser.PagerMessage", b =>
+                {
+                    b.Property<int>("PagerMessageId")
+                        .ValueGeneratedOnAdd()
+                        .HasColumnType("integer");
+
+                    NpgsqlPropertyBuilderExtensions.UseIdentityByDefaultColumn(b.Property<int>("PagerMessageId"));
+
+                    b.Property<string>("Message")
+                        .IsRequired()
+                        .HasColumnType("text");
+
+                    b.Property<DateTime>("Timestamp")
+                        .HasColumnType("timestamp with time zone");
+
+                    b.HasKey("PagerMessageId");
+
+                    b.HasIndex("Message");
+
+                    b.ToTable("PagerMessages");
+                });
+
+            modelBuilder.Entity("PagerParser.ParsedPagerMessage", b =>
+                {
+                    b.Property<int>("ParsedPagerMessageId")
+                        .ValueGeneratedOnAdd()
+                        .HasColumnType("integer");
+
+                    NpgsqlPropertyBuilderExtensions.UseIdentityByDefaultColumn(b.Property<int>("ParsedPagerMessageId"));
+
+                    b.Property<int>("AlertLevel")
+                        .HasColumnType("integer");
+
+                    b.Property<string>("AssignmentArea")
+                        .IsRequired()
+                        .HasColumnType("text");
+
+                    b.Property<int>("AttendingServices")
+                        .HasColumnType("integer");
+
+                    b.Property<string>("Description")
+                        .IsRequired()
+                        .HasColumnType("text");
+
+                    b.Property<int?>("FireGroundChannel")
+                        .HasColumnType("integer");
+
+                    b.Property<int>("FirecomJobNo")
+                        .HasColumnType("integer");
+
+                    b.Property<int?>("GpsPositionId")
+                        .HasColumnType("integer");
+
+                    b.Property<int?>("GridReference")
+                        .HasColumnType("integer");
+
+                    b.Property<string>("JobType")
+                        .IsRequired()
+                        .HasColumnType("text");
+
+                    b.Property<string>("MelwaysGrid")
+                        .HasColumnType("text");
+
+                    b.Property<int?>("MelwaysMapNo")
+                        .HasColumnType("integer");
+
+                    b.Property<string>("Note")
+                        .HasColumnType("text");
+
+                    b.Property<string>("PageDestination")
+                        .IsRequired()
+                        .HasColumnType("text");
+
+                    b.Property<int>("PagerMessage")
+                        .HasColumnType("integer");
+
+                    b.HasKey("ParsedPagerMessageId");
+
+                    b.HasIndex("FirecomJobNo");
+
+                    b.HasIndex("GpsPositionId");
+
+                    b.HasIndex("PagerMessage")
+                        .IsUnique();
+
+                    b.ToTable("ParsedPagerMessages");
+                });
+
+            modelBuilder.Entity("PagerParser.ParsedPagerMessage", b =>
+                {
+                    b.HasOne("PagerParser.GpsPosition", "GpsPosition")
+                        .WithMany()
+                        .HasForeignKey("GpsPositionId");
+
+                    b.HasOne("PagerParser.PagerMessage", "OriginalMessage")
+                        .WithOne("ParsedMessage")
+                        .HasForeignKey("PagerParser.ParsedPagerMessage", "PagerMessage")
+                        .OnDelete(DeleteBehavior.Cascade)
+                        .IsRequired();
+
+                    b.Navigation("GpsPosition");
+
+                    b.Navigation("OriginalMessage");
+                });
+
+            modelBuilder.Entity("PagerParser.PagerMessage", b =>
+                {
+                    b.Navigation("ParsedMessage");
+                });
+#pragma warning restore 612, 618
+        }
+    }
+}
diff --git a/Migrations/20230705160931_Initial.cs b/Migrations/20230705160931_Initial.cs
new file mode 100644
index 0000000..9f3068f
--- /dev/null
+++ b/Migrations/20230705160931_Initial.cs
@@ -0,0 +1,115 @@
+using System;
+using Microsoft.EntityFrameworkCore.Migrations;
+using Npgsql.EntityFrameworkCore.PostgreSQL.Metadata;
+
+#nullable disable
+
+namespace PagerParser.Migrations
+{
+    /// <inheritdoc />
+    public partial class Initial : Migration
+    {
+        /// <inheritdoc />
+        protected override void Up(MigrationBuilder migrationBuilder)
+        {
+            migrationBuilder.CreateTable(
+                name: "GpsPositions",
+                columns: table => new
+                {
+                    GpsPositionId = table.Column<int>(type: "integer", nullable: false)
+                        .Annotation("Npgsql:ValueGenerationStrategy", NpgsqlValueGenerationStrategy.IdentityByDefaultColumn),
+                    Latitude = table.Column<double>(type: "double precision", nullable: false),
+                    Longitude = table.Column<double>(type: "double precision", nullable: false)
+                },
+                constraints: table =>
+                {
+                    table.PrimaryKey("PK_GpsPositions", x => x.GpsPositionId);
+                });
+
+            migrationBuilder.CreateTable(
+                name: "PagerMessages",
+                columns: table => new
+                {
+                    PagerMessageId = table.Column<int>(type: "integer", nullable: false)
+                        .Annotation("Npgsql:ValueGenerationStrategy", NpgsqlValueGenerationStrategy.IdentityByDefaultColumn),
+                    Timestamp = table.Column<DateTime>(type: "timestamp with time zone", nullable: false),
+                    Message = table.Column<string>(type: "text", nullable: false)
+                },
+                constraints: table =>
+                {
+                    table.PrimaryKey("PK_PagerMessages", x => x.PagerMessageId);
+                });
+
+            migrationBuilder.CreateTable(
+                name: "ParsedPagerMessages",
+                columns: table => new
+                {
+                    ParsedPagerMessageId = table.Column<int>(type: "integer", nullable: false)
+                        .Annotation("Npgsql:ValueGenerationStrategy", NpgsqlValueGenerationStrategy.IdentityByDefaultColumn),
+                    FirecomJobNo = table.Column<int>(type: "integer", nullable: false),
+                    AssignmentArea = table.Column<string>(type: "text", nullable: false),
+                    JobType = table.Column<string>(type: "text", nullable: false),
+                    AlertLevel = table.Column<int>(type: "integer", nullable: false),
+                    Description = table.Column<string>(type: "text", nullable: false),
+                    MelwaysMapNo = table.Column<int>(type: "integer", nullable: true),
+                    MelwaysGrid = table.Column<string>(type: "text", nullable: true),
+                    GridReference = table.Column<int>(type: "integer", nullable: true),
+                    AttendingServices = table.Column<int>(type: "integer", nullable: false),
+                    Note = table.Column<string>(type: "text", nullable: true),
+                    FireGroundChannel = table.Column<int>(type: "integer", nullable: true),
+                    PageDestination = table.Column<string>(type: "text", nullable: false),
+                    GpsPositionId = table.Column<int>(type: "integer", nullable: true),
+                    PagerMessage = table.Column<int>(type: "integer", nullable: false)
+                },
+                constraints: table =>
+                {
+                    table.PrimaryKey("PK_ParsedPagerMessages", x => x.ParsedPagerMessageId);
+                    table.ForeignKey(
+                        name: "FK_ParsedPagerMessages_GpsPositions_GpsPositionId",
+                        column: x => x.GpsPositionId,
+                        principalTable: "GpsPositions",
+                        principalColumn: "GpsPositionId");
+                    table.ForeignKey(
+                        name: "FK_ParsedPagerMessages_PagerMessages_PagerMessage",
+                        column: x => x.PagerMessage,
+                        principalTable: "PagerMessages",
+                        principalColumn: "PagerMessageId",
+                        onDelete: ReferentialAction.Cascade);
+                });
+
+            migrationBuilder.CreateIndex(
+                name: "IX_PagerMessages_Message",
+                table: "PagerMessages",
+                column: "Message");
+
+            migrationBuilder.CreateIndex(
+                name: "IX_ParsedPagerMessages_FirecomJobNo",
+                table: "ParsedPagerMessages",
+                column: "FirecomJobNo");
+
+            migrationBuilder.CreateIndex(
+                name: "IX_ParsedPagerMessages_GpsPositionId",
+                table: "ParsedPagerMessages",
+                column: "GpsPositionId");
+
+            migrationBuilder.CreateIndex(
+                name: "IX_ParsedPagerMessages_PagerMessage",
+                table: "ParsedPagerMessages",
+                column: "PagerMessage",
+                unique: true);
+        }
+
+        /// <inheritdoc />
+        protected override void Down(MigrationBuilder migrationBuilder)
+        {
+            migrationBuilder.DropTable(
+                name: "ParsedPagerMessages");
+
+            migrationBuilder.DropTable(
+                name: "GpsPositions");
+
+            migrationBuilder.DropTable(
+                name: "PagerMessages");
+        }
+    }
+}
diff --git a/Migrations/PagerContextModelSnapshot.cs b/Migrations/PagerContextModelSnapshot.cs
new file mode 100644
index 0000000..879c13f
--- /dev/null
+++ b/Migrations/PagerContextModelSnapshot.cs
@@ -0,0 +1,156 @@
+// <auto-generated />
+using System;
+using Microsoft.EntityFrameworkCore;
+using Microsoft.EntityFrameworkCore.Infrastructure;
+using Microsoft.EntityFrameworkCore.Storage.ValueConversion;
+using Npgsql.EntityFrameworkCore.PostgreSQL.Metadata;
+using PagerParser;
+
+#nullable disable
+
+namespace PagerParser.Migrations
+{
+    [DbContext(typeof(PagerContext))]
+    partial class PagerContextModelSnapshot : ModelSnapshot
+    {
+        protected override void BuildModel(ModelBuilder modelBuilder)
+        {
+#pragma warning disable 612, 618
+            modelBuilder
+                .HasAnnotation("ProductVersion", "7.0.8")
+                .HasAnnotation("Relational:MaxIdentifierLength", 63);
+
+            NpgsqlModelBuilderExtensions.UseIdentityByDefaultColumns(modelBuilder);
+
+            modelBuilder.Entity("PagerParser.GpsPosition", b =>
+                {
+                    b.Property<int>("GpsPositionId")
+                        .ValueGeneratedOnAdd()
+                        .HasColumnType("integer");
+
+                    NpgsqlPropertyBuilderExtensions.UseIdentityByDefaultColumn(b.Property<int>("GpsPositionId"));
+
+                    b.Property<double>("Latitude")
+                        .HasColumnType("double precision");
+
+                    b.Property<double>("Longitude")
+                        .HasColumnType("double precision");
+
+                    b.HasKey("GpsPositionId");
+
+                    b.ToTable("GpsPositions");
+                });
+
+            modelBuilder.Entity("PagerParser.PagerMessage", b =>
+                {
+                    b.Property<int>("PagerMessageId")
+                        .ValueGeneratedOnAdd()
+                        .HasColumnType("integer");
+
+                    NpgsqlPropertyBuilderExtensions.UseIdentityByDefaultColumn(b.Property<int>("PagerMessageId"));
+
+                    b.Property<string>("Message")
+                        .IsRequired()
+                        .HasColumnType("text");
+
+                    b.Property<DateTime>("Timestamp")
+                        .HasColumnType("timestamp with time zone");
+
+                    b.HasKey("PagerMessageId");
+
+                    b.HasIndex("Message");
+
+                    b.ToTable("PagerMessages");
+                });
+
+            modelBuilder.Entity("PagerParser.ParsedPagerMessage", b =>
+                {
+                    b.Property<int>("ParsedPagerMessageId")
+                        .ValueGeneratedOnAdd()
+                        .HasColumnType("integer");
+
+                    NpgsqlPropertyBuilderExtensions.UseIdentityByDefaultColumn(b.Property<int>("ParsedPagerMessageId"));
+
+                    b.Property<int>("AlertLevel")
+                        .HasColumnType("integer");
+
+                    b.Property<string>("AssignmentArea")
+                        .IsRequired()
+                        .HasColumnType("text");
+
+                    b.Property<int>("AttendingServices")
+                        .HasColumnType("integer");
+
+                    b.Property<string>("Description")
+                        .IsRequired()
+                        .HasColumnType("text");
+
+                    b.Property<int?>("FireGroundChannel")
+                        .HasColumnType("integer");
+
+                    b.Property<int>("FirecomJobNo")
+                        .HasColumnType("integer");
+
+                    b.Property<int?>("GpsPositionId")
+                        .HasColumnType("integer");
+
+                    b.Property<int?>("GridReference")
+                        .HasColumnType("integer");
+
+                    b.Property<string>("JobType")
+                        .IsRequired()
+                        .HasColumnType("text");
+
+                    b.Property<string>("MelwaysGrid")
+                        .HasColumnType("text");
+
+                    b.Property<int?>("MelwaysMapNo")
+                        .HasColumnType("integer");
+
+                    b.Property<string>("Note")
+                        .HasColumnType("text");
+
+                    b.Property<string>("PageDestination")
+                        .IsRequired()
+                        .HasColumnType("text");
+
+                    b.Property<int>("PagerMessage")
+                        .HasColumnType("integer");
+
+                    b.HasKey("ParsedPagerMessageId");
+
+                    b.HasIndex("FirecomJobNo");
+
+                    b.HasIndex("GpsPositionId");
+
+                    b.HasIndex("PagerMessage")
+                        .IsUnique();
+
+                    b.ToTable("ParsedPagerMessages");
+                });
+
+            modelBuilder.Entity("PagerParser.ParsedPagerMessage", b =>
+                {
+                    b.HasOne("PagerParser.GpsPosition", "GpsPosition")
+                        .WithMany()
+                        .HasForeignKey("GpsPositionId");
+
+                    b.HasOne("PagerParser.PagerMessage", "OriginalMessage")
+                        .WithOne("ParsedMessage")
+                        .HasForeignKey("PagerParser.ParsedPagerMessage", "PagerMessage")
+                        .OnDelete(DeleteBehavior.Cascade)
+                        .IsRequired();
+
+                    b.Navigation("GpsPosition");
+
+                    b.Navigation("OriginalMessage");
+                });
+
+            modelBuilder.Entity("PagerParser.PagerMessage", b =>
+                {
+                    b.Navigation("ParsedMessage");
+                });
+#pragma warning restore 612, 618
+        }
+    }
+}
diff --git a/PagerContext.cs b/PagerContext.cs
new file mode 100644
index 0000000..73e675f
--- /dev/null
+++ b/PagerContext.cs
@@ -0,0 +1,17 @@
+using Microsoft.EntityFrameworkCore;
+
+namespace PagerParser;
+
+public class PagerContext : DbContext {
+    public DbSet<PagerMessage>       PagerMessages       { get; set; }
+    public DbSet<ParsedPagerMessage> ParsedPagerMessages { get; set; }
+    public DbSet<GpsPosition>        GpsPositions        { get; set; }
+
+    private IConfiguration config;
+
+    public PagerContext(IConfiguration config) =>
+        this.config = config;
+
+    protected override void OnConfiguring(DbContextOptionsBuilder options) =>
+        options.UseNpgsql(config.GetConnectionString("DefaultConnection"));
+}
\ No newline at end of file
diff --git a/PagerFetchService.cs b/PagerFetchService.cs
new file mode 100644
index 0000000..97a03d5
--- /dev/null
+++ b/PagerFetchService.cs
@@ -0,0 +1,62 @@
+using PagerParser.Sites;
+
+namespace PagerParser;
+
+// Self-explanatory... Hosted background services that periodically fetches
+// pager messages, tries to parse them, then adds both the raw pager message
+// as well as the parsed message contents to the DB, ignoring already fetched
+// messages in the process.
+public class PagerFetchService : IHostedService {
+    private readonly TimeSpan FetchInterval = TimeSpan.FromMinutes(15);
+
+    private IServiceProvider serviceProvider;
+    private IPagerMessageParserService parser;
+
+    private Timer fetchTimer;
+
+    private PagerMon pagerMon = new();
+
+    public PagerFetchService(IServiceProvider serviceProvider, IPagerMessageParserService parser) {
+        this.serviceProvider = serviceProvider;
+        this.parser          = parser;
+        fetchTimer           = new Timer(Fetch);
+    }
+
+    public Task StartAsync(CancellationToken cancellationToken) {
+        fetchTimer.Change(TimeSpan.Zero, FetchInterval);
+        return Task.CompletedTask;
+    }
+
+    public Task StopAsync(CancellationToken cancellationToken) {
+        fetchTimer.Change(Timeout.Infinite, Timeout.Infinite);
+        return Task.CompletedTask;
+    }
+
+    private void Fetch(object? state) {
+        using var scope = serviceProvider.CreateScope();
+        var db = scope.ServiceProvider.GetRequiredService<PagerContext>();
+
+        // Fetch pager messages, ignoring message we've already got
+        var messages = pagerMon
+            .Fetch()
+            .Where(m =>
+                !db.PagerMessages
+                .Select(m => m.Message)
+                .Contains(m.Message));
+
+        // Attempt to parse each newly-fetched message.
+        // Failure to parse isn't critical, as we still keep the raw message.
+        foreach(var message in messages) {
+            message.ParsedMessage = parser.TryParse(message.Message);
+            if(message.ParsedMessage is not null)
+                message.ParsedMessage.GpsPosition =
+                    PositionCalculator.GetGpsPosition(message.ParsedMessage);
+        }
+
+        db.AddRange(messages);
+        db.SaveChanges();
+    }
+
+    public void Dispose() =>
+        fetchTimer.Dispose();
+}
diff --git a/PagerMessage.cs b/PagerMessage.cs
new file mode 100644
index 0000000..dc30a05
--- /dev/null
+++ b/PagerMessage.cs
@@ -0,0 +1,124 @@
+using Microsoft.EntityFrameworkCore;
+using System.ComponentModel.DataAnnotations;
+using System.ComponentModel.DataAnnotations.Schema;
+using System.Text.RegularExpressions;
+
+namespace PagerParser;
+
+public enum AlertLevel {
+    Code1 = 1,
+    Code3 = 3
+}
+
+[Flags]
+public enum EmergencyService {
+    Ambulance = 1,
+    Fire      = 2,
+    Police    = 3,
+    Rescue    = 4,
+    SES       = 5
+}
+
+[Index(nameof(Message))]
+public class PagerMessage {
+    [DatabaseGenerated(DatabaseGeneratedOption.Identity)]
+    public int      PagerMessageId { get; set; }
+    public DateTime Timestamp      { get; set; }
+    public string   Message        { get; set; }
+
+    public virtual ParsedPagerMessage? ParsedMessage { get; set; }
+
+    public override int GetHashCode() =>
+        (Timestamp, Message).GetHashCode();
+}
+
+[Index(nameof(FirecomJobNo))]
+public class ParsedPagerMessage {
+    [DatabaseGenerated(DatabaseGeneratedOption.Identity)]
+    public int              ParsedPagerMessageId { get; set; }
+    public int              FirecomJobNo         { get; set; }
+    public string           AssignmentArea       { get; set; }
+    public string           JobType              { get; set; }
+    public AlertLevel       AlertLevel           { get; set; }
+    public string           Description          { get; set; }
+    public int?             MelwaysMapNo         { get; set; }
+    public string?          MelwaysGrid          { get; set; }
+    public int?             GridReference        { get; set; }
+    public EmergencyService AttendingServices    { get; set; }
+    public string?          Note                 { get; set; }
+    public int?             FireGroundChannel    { get; set; }
+    public string           PageDestination      { get; set; }
+
+    public virtual GpsPosition? GpsPosition { get; set; }
+
+    [ForeignKey(nameof(PagerMessage))]
+    public virtual PagerMessage OriginalMessage { get; set; }
+}
+
+public interface IPagerMessageParserService {
+    public ParsedPagerMessage  Parse(string message);
+    public ParsedPagerMessage? TryParse(string message);
+}
+
+// We run the pager message parser as a service with a single instance
+// as this allows us to pre-compile the parsing regular expression
+// which will help when potentially processing 1000's of pager messages.
+//
+// Running a single instance of the service isn't an issue, as this
+// service is only used by the fetch service for parsing new messages.
+public class PagerMessageParserService : IPagerMessageParserService {
+    private const string Pattern =
+        @"^@@ALERT\s+([A-Z]+[0-9]+)\s+([A-Z&]+)C([13])\s+(.*)\s+M\s+(\d+)\s+([A-Z]\d+)\s+\((\d+)\)\s+(\*\s+[^*]+\*\s+)?([AFPRS]+)\s+((C[A-Z]+)\s+)+FGD(\d+)\s+(P\d+\s+)?F(\d+)\s+\[([A-Z]+)\]$";
+
+    private Regex pageMessageRegex = new Regex(Pattern, RegexOptions.Compiled | RegexOptions.IgnoreCase);
+
+    public ParsedPagerMessage Parse(string message) {
+        ParsedPagerMessage m = new();
+
+        var match = pageMessageRegex.Match(message);
+
+        if(!match.Success)
+            throw new ArgumentException();
+
+        // Parse non-optional message components
+        m.AssignmentArea  = match.Groups[1].Value;
+        m.JobType         = match.Groups[2].Value;
+        m.Description     = match.Groups[4].Value;
+        m.FirecomJobNo    = Int32.Parse(match.Groups[14].Value);
+        m.PageDestination = match.Groups[15].Value;
+
+        // Parse optional message components
+        if(match.Groups[5].Success)  m.MelwaysMapNo      = Int32.Parse(match.Groups[5].Value);
+        if(match.Groups[6].Success)  m.MelwaysGrid       = match.Groups[6].Value;
+        if(match.Groups[7].Success)  m.GridReference     = Int32.Parse(match.Groups[7].Value);
+        if(match.Groups[8].Success)  m.Note              = match.Groups[8].Value;
+        if(match.Groups[12].Success) m.FireGroundChannel = Int32.Parse(match.Groups[12].Value);
+
+        switch(match.Groups[3].Value) {
+            case "1": m.AlertLevel = AlertLevel.Code1; break;
+            case "3": m.AlertLevel = AlertLevel.Code3; break;
+            default: throw new ArgumentException();
+        }
+
+        // Handle each character to construct a bitmap of attending services
+        foreach(char c in match.Groups[9].Value) {
+            switch(c) {
+                case 'A': m.AttendingServices |= EmergencyService.Ambulance; break;
+                case 'F': m.AttendingServices |= EmergencyService.Fire;      break;
+                case 'P': m.AttendingServices |= EmergencyService.Police;    break;
+                case 'R': m.AttendingServices |= EmergencyService.Rescue;    break;
+                case 'S': m.AttendingServices |= EmergencyService.SES;       break;
+            }
+        }
+
+        return m;
+    }
+
+    public ParsedPagerMessage? TryParse(string message) {
+        try {
+            return Parse(message);
+        } catch {
+            return null;
+        }
+    }
+}
\ No newline at end of file
diff --git a/PagerParser.csproj b/PagerParser.csproj
new file mode 100644
index 0000000..0652e9b
--- /dev/null
+++ b/PagerParser.csproj
@@ -0,0 +1,22 @@
+<Project Sdk="Microsoft.NET.Sdk.Web">
+
+  <PropertyGroup>
+    <TargetFramework>net7.0</TargetFramework>
+    <Nullable>enable</Nullable>
+    <ImplicitUsings>enable</ImplicitUsings>
+  </PropertyGroup>
+
+  <ItemGroup>
+    <PackageReference Include="CoordinateSharp" Version="2.18.1.1" />
+    <PackageReference Include="Npgsql.EntityFrameworkCore.PostgreSQL" Version="7.0.4" />
+    <PackageReference Include="Swashbuckle.AspNetCore" Version="6.5.0" />
+    <PackageReference Include="Microsoft.EntityFrameworkCore" Version="7.0.8" />
+    <PackageReference Include="Microsoft.EntityFrameworkCore.Proxies" Version="7.0.8" />
+	  <PackageReference Include="Microsoft.EntityFrameworkCore.Design" Version="7.0.8">
+	    <PrivateAssets>all</PrivateAssets>
+	    <IncludeAssets>runtime; build; native; contentfiles; analyzers; buildtransitive</IncludeAssets>
+	  </PackageReference>
+    <PackageReference Include="System.Configuration.ConfigurationManager" Version="7.0.0" />
+  </ItemGroup>
+
+</Project>
\ No newline at end of file
diff --git a/PositionCalculator.cs b/PositionCalculator.cs
new file mode 100644
index 0000000..8d8a94f
--- /dev/null
+++ b/PositionCalculator.cs
@@ -0,0 +1,100 @@
+using CoordinateSharp;
+using PagerParser;
+using System;
+using System.ComponentModel.DataAnnotations.Schema;
+using System.Text.RegularExpressions;
+
+namespace PagerParser;
+
+public class GpsPosition {
+    [DatabaseGenerated(DatabaseGeneratedOption.Identity)]
+    public int    GpsPositionId { get; set; }
+    public double Latitude      { get; set; }
+    public double Longitude     { get; set; }
+}
+
+public record MelwaysPage {
+    public int    PageNo    { get; set; }
+    public double Latitude  { get; set; }
+    public double Longitude { get; set; }
+}
+
+// Derive roughly-accurate GPS coordinates from a Melways page number
+// and grid number (e.g: 131 D7) by looking up the origin coordinates
+// of the Melways page from a pre-defined table, then interpolating
+// the grid number across the page to get a (very) rough position.
+public class PositionCalculator {
+    private const float PageWidth  = 0.0583403752108005f;
+    private const float PageHeight = 0.0444074086328539f;
+
+    private const int ColCount = 10;
+    private const int RowCount = 12;
+
+    private const float ColWidth  = PageWidth  / ColCount;
+    private const float RowHeight = PageHeight / RowCount;
+
+    private static readonly MelwaysPage[] MelwaysPages = {
+        new MelwaysPage { PageNo = 94,  Latitude = -38.0062431030181, Longitude = 145.153465677450 },
+        new MelwaysPage { PageNo = 95,  Latitude = -38.0061349929752, Longitude = 145.197873798763 },
+        new MelwaysPage { PageNo = 96,  Latitude = -38.0060458242193, Longitude = 145.242282747795 },
+        new MelwaysPage { PageNo = 98,  Latitude = -38.0501502394990, Longitude = 145.153538108815 },
+        new MelwaysPage { PageNo = 110, Latitude = -38.0059397267576, Longitude = 145.286740799198 },
+        new MelwaysPage { PageNo = 111, Latitude = -38.0058646642328, Longitude = 145.331164408607 },
+        new MelwaysPage { PageNo = 128, Latitude = -38.0500712736303, Longitude = 145.197997939698 },
+        new MelwaysPage { PageNo = 129, Latitude = -38.0499811306888, Longitude = 145.242424322651 },
+        new MelwaysPage { PageNo = 130, Latitude = -38.0498760059982, Longitude = 145.286857218675 },
+        new MelwaysPage { PageNo = 131, Latitude = -38.0497905233513, Longitude = 145.331303121527 },
+        new MelwaysPage { PageNo = 212, Latitude = -38.0056782419614, Longitude = 145.375580424547 },
+        new MelwaysPage { PageNo = 213, Latitude = -38.0055063939227, Longitude = 145.419999796841 },
+        new MelwaysPage { PageNo = 214, Latitude = -38.0496145139129, Longitude = 145.375744441368 },
+        new MelwaysPage { PageNo = 215, Latitude = -38.0494726543543, Longitude = 145.420190429893 },
+        new MelwaysPage { PageNo = 315, Latitude = -38.0053618479218, Longitude = 145.464319398407 },
+        new MelwaysPage { PageNo = 317, Latitude = -38.0493097638301, Longitude = 145.464666307851 }
+    };
+
+    public static GpsPosition? GetGpsPosition(ParsedPagerMessage message) {
+        if(message.MelwaysMapNo is null || message.MelwaysGrid is null)
+            return null;
+        var page = MelwaysPages.FirstOrDefault(p => p.PageNo == message.MelwaysMapNo);
+        if(page is null)
+            return null;
+
+        var match = Regex.Match(message.MelwaysGrid.ToUpper(), "^([A-HJ-K])([0-9]+)$");
+        if(!match.Success)
+            return null;
+
+        var row = int.Parse(match.Groups[2].Value) - 1;
+        var col = match.Groups[1].Value[0] - 'A';
+        if(col > 7)
+            col -= 1; // Compensate for Melways grids skipping 'I'
+
+        var position = new GpsPosition {
+            Latitude  = page.Latitude  - (row * RowHeight)  - (RowHeight  / 2),
+            Longitude = page.Longitude + (col * ColWidth)   + (ColWidth   / 2)
+        };
+
+        if(message.GridReference is null)
+            return position;
+
+        // If we have a 6-digit grid reference, try to refine the location further
+        // using the UTM coordinate system. Since zone information isn't included
+        // in a 6-digit grid reference, we use the coordinates calculated from the
+        // Melways as a starting point to find the zone.
+
+        double gridRef = (double) message.GridReference;
+
+        var origUTM = new Coordinate(position.Latitude, position.Longitude).UTM;
+        var newUTM = new UniversalTransverseMercator(
+            origUTM.LatZone,
+            origUTM.LongZone,
+            (Math.Floor(origUTM.Easting / 100000) * 100000) + (Math.Floor(gridRef / 1000) * 100),
+            (Math.Floor(origUTM.Northing / 100000) * 100000) + ((gridRef % 1000) * 100));
+
+        var coord = UniversalTransverseMercator.ConvertUTMtoLatLong(newUTM);
+
+        position.Latitude  = coord.Latitude.ToDouble();
+        position.Longitude = coord.Longitude.ToDouble();
+
+        return position;
+    }
+}
\ No newline at end of file
diff --git a/Program.cs b/Program.cs
new file mode 100644
index 0000000..ba53ccb
--- /dev/null
+++ b/Program.cs
@@ -0,0 +1,71 @@
+using Microsoft.EntityFrameworkCore;
+using System.Text.Json.Serialization;
+
+namespace PagerParser;
+
+public class Program {
+    public static void Main(string[] args) {
+        var builder = WebApplication.CreateBuilder(args);
+
+        builder.Services.AddDbContext<PagerContext>();
+
+        // This is necessary if we don't want enum values sent as integers in JSON objects
+        builder.Services.AddControllers().AddJsonOptions(o => {
+            var converter = new JsonStringEnumConverter();
+            o.JsonSerializerOptions.Converters.Add(converter);
+        });
+
+        builder.Services.AddCors();
+
+        // Add our custom services
+        builder.Services.AddSingleton<IPagerMessageParserService, PagerMessageParserService>();
+        builder.Services.AddHostedService<PagerFetchService>();
+
+        var app = builder.Build();
+
+        // Create a temporary scope so that we can access services during startup
+        using var scope = app.Services.CreateScope();
+        var config = scope.ServiceProvider.GetRequiredService<IConfiguration>();
+        var parser = scope.ServiceProvider.GetRequiredService<IPagerMessageParserService>();
+
+        // Ensure the database is created and the correct schema is used
+        // If we did update the database schema, attempt to re-parse all
+        // messages.
+        using var db = scope.ServiceProvider.GetRequiredService<PagerContext>();
+        var needsMigration = db.Database.GetPendingMigrations().Any();
+        db.Database.Migrate();
+
+        if(config.GetValue<bool>("PagerParser:ReparseAllOnStartup")) {
+            db.ParsedPagerMessages.RemoveRange(
+                db.ParsedPagerMessages.ToArray());
+            db.SaveChanges();
+            foreach(var message in db.PagerMessages) {
+                message.ParsedMessage = parser.TryParse(message.Message);
+                if(message.ParsedMessage is not null)
+                    message.ParsedMessage.GpsPosition =
+                        PositionCalculator.GetGpsPosition(message.ParsedMessage);
+            }
+            db.SaveChanges();
+        } else if(config.GetValue<bool>("PagerParser:ReparseFailedOnStartup")) {
+            foreach(var message in db.PagerMessages.Where(m => m.ParsedMessage == null)) {
+                message.ParsedMessage = parser.TryParse(message.Message);
+                if(message.ParsedMessage is not null)
+                    if(message.ParsedMessage.GpsPosition is null)
+                        message.ParsedMessage.GpsPosition =
+                            PositionCalculator.GetGpsPosition(message.ParsedMessage);
+            }
+            db.SaveChanges();
+        }
+
+        // Start the server
+        app.UseCors(p => p
+            .AllowAnyOrigin()
+            .AllowAnyMethod()
+            .AllowAnyHeader());
+        app.UseHttpsRedirection();
+        app.UseHsts();
+        app.UseStaticFiles();
+        app.MapControllers();
+        app.Run();
+    }
+}
diff --git a/Properties/launchSettings.json b/Properties/launchSettings.json
new file mode 100644
index 0000000..76b65da
--- /dev/null
+++ b/Properties/launchSettings.json
@@ -0,0 +1,11 @@
+{
+  "profiles": {
+    "PagerParser": {
+      "commandName": "Project",
+      "environmentVariables": {
+        "ASPNETCORE_ENVIRONMENT": "Development"
+      },
+      "applicationUrl": "https://localhost:2979;http://localhost:2980"
+    }
+  }
+}
\ No newline at end of file
diff --git a/README.md b/README.md
new file mode 100644
index 0000000..041caa1
--- /dev/null
+++ b/README.md
@@ -0,0 +1,35 @@
+# About
+
+Pager Parser is a service designed to act as a "central hub" for pager messages. Pager Parser receives pager messages, parses them, stores them and can initiate actions based on their contents.
+
+# Features
+- Flexible framework designed to receive pager messages from a variety of data sources such as [PagerMon](https://github.com/pagermon/pagermon) ([Jobyyy](https://jobyyy.net/))
+- Parsing of useful information from pager messages such as job type, paged services, etc
+- Storage of received pager messages for archival purposes
+- Storage of parsed pager message data for archival as well as generating useful metrics
+
+# Building
+
+### Pre-requisites
+
+To build the project, the .NET 7.0 SDK is required
+
+### Standalone
+
+To build the project, simply execute the following command from the project base directory:
+
+```sh
+dotnet build -c Release
+```
+
+The resulting output files may be found in the `bin/Release` directory
+
+# Deployment
+
+### Configuration
+
+To configure the project, simply edit the `appsettings.json` file, populating the desired sections
+
+### Standalone
+
+Standalone deployments of the project are current not supported in any official capacity. It is possible to run the project as a standalone deployment by registering the main executable to be started automatically and persisted in the background. This may be achieved on Linux using a systemd unit file or on Windows as an auto-start program.
diff --git a/Sites/PagerMon.cs b/Sites/PagerMon.cs
new file mode 100644
index 0000000..fb25323
--- /dev/null
+++ b/Sites/PagerMon.cs
@@ -0,0 +1,36 @@
+namespace PagerParser.Sites;
+
+// Interface class for fetching pager messages from PagerMon
+// sites such as Jobyyy over HTTP.
+public class PagerMon {
+    public record PagerMonMessage {
+        public long   Timestamp { get; set; }
+        public string Message   { get; set; }
+    }
+
+    public record PagerMonQueryResponse {
+        public PagerMonMessage[] Messages { get; set; }
+    }
+
+    private const string QueryUrl =
+        "https://jobyyy.net/api/messageSearch?alias=6&limit=100";
+
+    private HttpClient httpClient = new();
+
+    public PagerMessage[] Fetch() {
+        List<PagerMessage> messages = new();
+
+        var result = httpClient
+            .GetFromJsonAsync<PagerMonQueryResponse>(QueryUrl)
+            .GetAwaiter()
+            .GetResult();
+
+        if(result is null)
+            return Array.Empty<PagerMessage>();
+
+        return result.Messages.Select(m => new PagerMessage() {
+            Timestamp = DateTimeOffset.FromUnixTimeSeconds(m.Timestamp).DateTime.ToUniversalTime(),
+            Message   = m.Message
+        }).ToArray();
+    }
+}
\ No newline at end of file
diff --git a/appsettings.json b/appsettings.json
new file mode 100644
index 0000000..624334b
--- /dev/null
+++ b/appsettings.json
@@ -0,0 +1,9 @@
+{
+  "PagerParser": {
+    "ReparseAllOnStartup": false,
+    "ReparseFailedOnStartup": true
+  },
+  "ConnectionStrings": {
+    "DefaultConnection": "Host=127.0.0.1;Database=PagerParser;Username=pagerparser;Password=password"
+  }
+}
\ No newline at end of file